![background image](http://html1.mh-extra.com/html/omron/cx-process-monitor-plus-2/cx-process-monitor-plus-2_operation-manual_744195017.webp)
2
CX-Process Monitor Plus
Section 1-1
1-1
CX-Process Monitor Plus
1-1-1
Outline
The CX-Process Monitor Plus is a Windows NT-based application that moni-
tors the Function Block data within a Loop Control Unit/Board using Control
screens (on-site instrument images), Trend screens, Graphic screens, and
Annunciator screens, etc., via the Controller Link, serial communications, or
Ethernet. The CX-Process Monitor Plus is used together with the CX-Process
Tool to create function blocks for Loop Control Units/Boards.
You can also perform the following four functions.
Monitoring Function
Blocks in a Loop Control
Unit/Board
Monitor PV, SP, and MV, etc., within the Control Block, monitor analog signals,
and monitor contact signals.
Perform Run/Stop instructions in the Loop Control Unit/Board.
Display the status of the CPU Unit, such as the current operating mode.
Controlling Function
Blocks in a Loop Control
Unit/Board
Change settings, switch between auto and manual, and perform manual oper-
ations, tune PID constants, etc., in the Control Block.
You can perform stop block operation commands for each Control Block
(when using the Tuning screen).
Monitoring Function Block
Alarm Status in a Loop
Control Unit/Board
Display Control Block and Alarm Block alarms if they occur, and store the
alarms in the alarm history.
Configuring CX-Process
Monitor Plus Screens
You can configure the screen to suit your needs.
Summary of Contents for CX-Process Monitor Plus 2
