![background image](http://html1.mh-extra.com/html/omron/cx-process-monitor-plus-2/cx-process-monitor-plus-2_operation-manual_744195094.webp)
79
Starting and Stopping the CX-Process Monitor Plus
Section 4-4
4-4-2
Stopping the CX-Process Monitor Plus
To stop the CX-Process Monitor Plus, click the
Close
Button at the top right of
the Overview Screen. If a monitoring process, such as data or trend collec-
tion, is in progress, a dialog box will be displayed to confirm that the process is
to be stopped.
Select
Yes
to end the monitor process. Select
No
to continue running the
monitor process.
Note
Stopping a Monitoring Process That Was Continued:
Use the following procedure to stop a process that was continued by clicking
the
No
Button in the above dialog box.
1.
Start the CX-Process Monitor Plus.
2.
Click the
Exit
Button in the CX-Process Monitor Plus Main Window. The
dialog box will again be displayed to confirm that the process is to be
stopped. Click the
Yes
Button.
The CX-Process Monitor Plus will be closed and the monitoring process
will be stopped.
Summary of Contents for CX-Process Monitor Plus 2
