202
Screen Configuration
Section 5-5
Detailed Settings
Select the tag name, and then click the
Details
Button. The following dialog
box will be displayed.
After making the settings, click the
OK
Button.
Display is red for an occurrence, and black following recovery.
3.
Complete the above settings, and then click the
OK
Button.
The alarm message will be registered, and the name of the screen you en-
tered will be displayed in the Screen Management Tree.
Automatic Allocation Function for Alarm Tags
Tags specified with the CX-Process Tool can be set as alarm tags. Alarm tags
can be displayed in the Alarm History Screens. The following tags can be set
as alarm tags.
• Tags for Monitor Plus for Internal Switch blocks
• Data in the User Link Table when the analog/digital type is set to a contact
Use to the following procedure to set alarm tags.
Internal Switch Blocks
1,2,3...
1.
Select
Internal Switch
as the function block and select Monitor Plus tags
from the tag setting menu.
Set the timing to display the
messages
Enter the alarm message. You can enter up
to 94 characters.
Summary of Contents for CX-Process Monitor Plus 2
