163
Creating Graphic Screens
Section 5-4
Data (
)
Executes the following operations for specified tag (analog ITEM) values.
• Data view: Reads and displays specified tag values.
• Data input: Writes to specified tags the values input for data.
Setting Method
General Tab
Note
Upper and Lower Limits for Inputs
1.
Upper and lower limits can be set once the following items have been set.
Select
Input
for the
Data
operation.
Select
Tag (Analog ITEM)
for
Tag Data
.
2.
The upper and lower limits are automatically displayed according to the tag
ITEM type selected for
Tag Data
.
The upper and lower limits can be changed when inputting numbers direct-
ly.
3.
Operation when Using Upper and Lower Limits
When changing a number, the upper and lower limits are displayed as
shown below. If a number exceeding the upper or lower limit is input, a
message is displayed and the input is not allowed.
Select the data
display frame type.
Set the font for the
numbers displayed.
Select the data operation.
View: Read and display specified tags.
Input: Write to specified tags the values input for data.
Select the tag name for the
function block.
Select the function block ITEM
for the above tag.
Upper and lower limits can be set for input
values. (See note.)
Select the position of
numbers to be displayed in
the data frame.
Summary of Contents for CX-Process Monitor Plus 2
