![background image](http://html1.mh-extra.com/html/omron/cx-process-monitor-plus-2/cx-process-monitor-plus-2_operation-manual_744195206.webp)
191
Screen Configuration
Section 5-5
6.
Select the tag number for the batch trend collection. Register the tag name
and then set
Detail
as described below.
7.
Select the option to enable auto-saving of CSV files (described below).
8.
Click the
OK
Button.
The Batch Trend Screen will be registered and the screen name that was
input will be displayed on the Screen Management Tree.
Note
If a setting is changed while the Continue previous batch when restarted
option is selected, the following dialog box will be displayed.
To make the change, click the OK Button. To cancel the change, click the Can-
cel Button.
Setting Auto-saving of
CSV Files
The CSV file auto-save function is described below.
Enabling Auto-saving
When
Auto-save enable
is selected, a CSV file is automatically created when
the condition for the batch collection is stopped.
Destination Folder for Saved Files
Specify the destination folder for saved files at
Destination folder to save
.
The folder can be found by using the
Browse
Button. Within the destination
folder, folders will be automatically created for the dates on which the batch
collections are started, and the CSV files will be saved in those folders.
•
Click the box to display the dialog box
shown below.
•
Select the tag ITEM for the analog
ITEM that is to be registered. In this
example, a function block tag ITEM
(PV) with the tag name "Tag001" is
selected.
•
Click the box to display the dialog box shown below.
•
These settings are normally made automatically. It is
possible, however, that certain data (such as a PID
constant) may not match the display on the chart. In
cases such as that, the upper and lower limit settings
must be changed.
Summary of Contents for CX-Process Monitor Plus 2
