![background image](http://html1.mh-extra.com/html/omron/cx-process-monitor-plus-2/cx-process-monitor-plus-2_operation-manual_744195241.webp)
226
Checking Configurations
Section 5-7
5-7
Checking Configurations
Start the monitor process with the
Setup
Button in the Main Window, and dis-
play the Overview Screen to check that the screen configurations have been
set correctly.
Refer to the sections from
4-5
onwards for details on operations on Monitor
Screens selected from the Overview Screen.
5-7-1
Starting the Monitor Process and Displaying the Overview
Window
1,2,3...
1.
In the Main Window, click the
Setup
Button.
A dialog box will be displayed to input the password.
2.
Input the password and click the
OK
Button.
The Setup Dialog Box will be displayed.
3.
Click the
Run
Button.
4.
The Monitor Process will start and the Setup Dialog Box will be closed.
Only if using Serial (i.e., Host Link) communications, FinsGateway Serial
Unit communications with the PLC will start according to the following com-
munications conditions set using the System Monitor Setting Window (us-
ing the System Monitor Builder Button in the Setup Dialog Box) at the same
time as the Monitor Process starts. Unless
Initialize Serial Port
in the Se-
rial Communications Detailed Settings Dialog Box is selected, however,
communications will not start automatically. Refer to
5-3 System Monitor
Settings
for details.
• Communications type: Serial (Host Link)
• COM port used and baud rate (if using Host Link)
Select Start,
Program
,
Omron
,
CX-Process Monitor Plus
, and
CX-Process Monitor Plus
.
In the Main Window, click the
Setup
Button.
Enter the password.
In the Setup Dialog Box, click the
Run
Button.
Start the Monitor Process for the screen you have configured, and start FinsGateway Serial Unit communications.
(See note.)
Note
Set the FinsGateway communications type (Host Link), the COM port used by the Host Link, and
the baud rate using the configuration's System Monitor Setting Window. You must start the
FinsGateway Controller Link and Ethernet manually.
In the Overview Screen, select the Control Screen, Trend Screen, etc., and check their operation.
(To enable auto-starting to an Overview Screen)
Click the
System info.
Button in the Setup Dialog and set the
Auto-start-Auto-start
setting to Enable.
Summary of Contents for CX-Process Monitor Plus 2
