![background image](http://html1.mh-extra.com/html/omron/cx-process-monitor-plus-2/cx-process-monitor-plus-2_operation-manual_744195160.webp)
145
System Monitor Settings
Section 5-3
Note
Set the PLC settings (node address, Unit address, etc.) made here to agree
with the network address, node address, and Unit address settings made
using CX-Process Tool. If the settings do not agree, monitoring using the Sys-
tem Monitor Screen will not be performed correctly.
1,2,3...
1.
In the Setup Dialog Box, click the
System Monitor Builder
Button.
The System Monitor Setting Window will be displayed.
2.
Select the node number allocated to the PLC or computer, as described
below, and then click the button displayed under the node number.
• PLC: Select the number from the list box.
• Computer: Input the number in the list box. Normally register node 32.
(The node number of the computer connected to the PLC is the same as
the number input for the computer node in the bottom right of the System
Monitor Settings Window.)
Click here
Specify the node address of the computer connected to the PLC (the
default is 32). Normally, be sure to allocate 32 to the computer con-
nected to the PLC. Also, set the node address of the FinsGateway
computer to 32.
Summary of Contents for CX-Process Monitor Plus 2
