![background image](http://html1.mh-extra.com/html/omron/cx-process-monitor-plus-2/cx-process-monitor-plus-2_operation-manual_744195182.webp)
167
Creating Graphic Screens
Section 5-4
Polygon
1,2,3...
1.
Either click the polygon icon in the Object Tool Bar or select
Insert Figure/
Image - Polygon
.
2.
Click the end point and then click the next corner.
3.
Double-click the end point.
Setting Method
The settings are described here using a figure (rectangle with rounded cor-
ners) as an example.
Border Line Tab
Click
Start point
Double-click
Select whether border lines are to be
used for the figure.
Select how the border line color is to
be displayed.
Direct color settings:
The border line color is fixed.
The color is directly specified in
the
Color settings
.
Tag settings:
The border line color is changed
according to the tag value.
Select the tag name for controlling the border line color.
Set the condition for the border line color to be displayed.
The screen displayed will depend on the tag type (contact ITEM or analog ITEM). (See note.)
Set the line width for
when the line type is
solid line
.
Set the type of line
to be used for the
border lines.
Set the rounding
of the corners.
Select the tag ITEM.
Summary of Contents for CX-Process Monitor Plus 2
