![background image](http://html1.mh-extra.com/html/xerox/dc-220-st/dc-220-st_tips-and-tricks_3524231001.webp)
DC98CC09
Page 1 of 4
A Publication of the Digital Solutions & Support Centre
Upgrading the Windows NT
PostScript Driver
Purpose
Two outstanding issues with the NT PostScript print driver for the DC 220/230 family of
printers are:
• Upgrading the driver to a newer version
• Changing server driver defaults from a remote workstation
Versions affected
All versions released before November 1, 1998 are affected. This procedure will also work
with drivers that are expected to be released in the future. Please see the installation
instructions for those particular driver versions for optimum instructions.
Upgrading the driver to a newer version
Installing a newer version of the Xerox printer driver over an existing (older) version may not
successfully remove the old driver. Some symptoms of this problem are unusual default
values (i.e., pink stock instead of white) or some features of the driver not working (such as
Staple).
The following installation steps are for a PC that already has a DC 220/230 printer driver.
Note that you
must
upgrade the server drivers first in a client/server environment. See
Glossary for definitions.
Also, be aware that you
must
perform these steps for each computer (server and client) that
requires the upgraded driver.
1. Record the printer names and ports on the PC for use in later steps.
2. Select [
Start
], then choose [
Settings: Printers
].
DC Tips
… for the user
Xerox Document Centre
DC98CC09
November 25, 1998
This Document
pertains to these
Xerox
products:
X
DC 220/230
ST/LP
DC 240/255/265
ST/LP
DCS 20/35
Issue 1
Caution:
To successfully
upgrade the NT
driver, you
must
follow the steps in
this document
precisely.
Otherwise, the
driver will not
function properly.