![background image](http://html.mh-extra.com/html/intel/active-management-technology-v4-0/active-management-technology-v4-0_administrators-manual_2073395001.webp)
Intel® Active Management Technology v4.0
Administrator's Guide
Overview
Product Overview
Operational Modes
Setup and Configuration Overview
Provisioning Methods
Menus and Defaults
MEBx Settings Overview
ME Configuration Menu
AMT Configuration Menu
MEBx Defaults
Setup and Configuration
Methods Overview
Configuration Service
MEBx Interface
(Enterprise Mode)
MEBx Interface
(SMB Mode)
System Deployment
Operating System Drivers
Management
Intel AMT Web GUI
AMT Redirection (SOL/IDE-R)
AMT Redirection Overview
Troubleshooting
Troubleshooting
If you purchased a DELL™ n Series computer, any references in this document to Microsoft
®
Windows
®
operating systems
are not applicable.
Information in this document is subject to change without notice.
© 2008 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, Latitude, and the DELL logo are trademarks of Dell Inc.; Intel is a registered trademark of Intel Corporation in
the U.S. and other countries; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in the United States
and/or other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
August 2008 Rev. A00
Summary of Contents for Active Management Technology v4.0
