Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 136 / 208

DANGER
If the machine is equipped with middle markers, ensure that they have settled into their
transport position and their ball valves are closed, as speci ed in section 3.4. Using the
middle marker ball valves.
7.1. Inspections
7.1.1. Quick instructions, inspections
The inspections to be performed on the seed drill are shown in the table below. The inspections
to be carried out once per operating season are performed in the spring when the machine is
commissioned after winter storage.
Table. 7.1.1. - 18. Inspections to be performed on the seed drill
1) After the
rst 10
hectares
2) Every
50
hectares
3) Every 500 hectares or
once per operating season
7.1.2. Checking bolt tightness X X
7.1.3. Checking tyre pressure X X
7.1.4. Checking the bearing
clearance of the wheel packer hubs
X
7.1.5. Checking the tightness of the
transmission chains
X X
7.1.6. Checking the tightness of the
wheel drive chain
X X
7.1.7. Inspecting the wheel drive
clutch
X
7.1.8. Inspecting the wheel drive
clearance
X X
7.1.9. Checking the condition of
hydraulics
X
7.1.10. Checking the condition of
electric wires
X
7.1.11. Inspecting the towing eye X
7.1.12. Checking the gearbox oil
level
X
7.1.13. Inspecting the coulter discs X
7.1.14. Checking the functioning of
the adjusting of fertiliser target rate
X
Operation and maintenance manual
FX300 and FX400 SeedPilot
1.00
136 (208)