Figure. 7.1.11. - 189. Wear in the towing eye
The maximum wear (A) is 2.5 mm. The maximum size for the opening is 52.5 mm.
2. Check that there are no fractures in the towing eye.
If necessary, replace the towing eye in accordance with the instructions in section 7.8.1.
7.1.12. Checking the gearbox oil level
Figure. 7.1.12. - 190. Gearbox oil level
1. Check the oil level in the gearbox(es).
The oil level should be at 40-45 mm from the bottom of the ll hole (1). If needed,
add oil.
The oil must be changed at least every ve years to remove condensed water
from the gearbox.
The correct oil volume is 0.8 litres. Use ISO VG32 grade hydraulic oil.
Operation and maintenance manual
FX300 and FX400 SeedPilot
1.00
148 (208)
Summary of Contents for FX300 SeedPilot
