Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 186 / 208

Figure. 7.9.3.1. - 255. Removing the bearing and O-ring
2. Detach the O-ring (3) from the front of the bearing.
3. Remove the bearing (2) from the bearing housing (1).
Pull the bearing using a clamp.
7.9.3.2. Installing the bearing
Figure. 7.9.3.2. - 256. Installing the bearing
1. Clean the bearing housing (1).
2. Install a new bearing (2).
Install the bearing using a clamp.
3. Replace the O-ring (3).
Operation and maintenance manual
FX300 and FX400 SeedPilot
1.00
186 (208)