Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 52 / 208

6. Install options / factory settings
Accessory screen.
Changing parameters using only a maintenance PIN code.
7. PIN
Entering a PIN code.
The PIN code for sensor calibration is “3”.
The PIN code for travel distance calibration is “5”.
Figure. 4.2.4.4. - 50. Alarms
The alarm is active when the box is checked.
1. Shaft rotation guard - fertiliser
2. Shaft rotation guard - small seed
3. Main chain gear
Disabled. The alarm is not activated.
4. Shaft rotation guard - seed
5. Tramline clutch guard - seed
Monitors that the tramline clutch rotates when tramline is not on.
Monitors that the tramline clutch is not rotating when the tramline is on.
6. Tramline clutch guard - fertiliser
Monitors that the tramline clutch rotates when tramline is not on.
Monitors that the tramline clutch is not rotating when the tramline is on.
Operation and maintenance manual
FX300 and FX400 SeedPilot
1.00
52 (208)