Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 95 / 208

Figure. 6.3.10. - 110. Drive screen in manual mode
The buttons are yellow when activated.
1. Left middle marker
When activated, middle markers will be lowered when machine is lowered
2. Right middle marker
When activated, middle markers will be lowered when machine is lowered
3. Half lift
Half lift is on when activated
4. Work light control
Only in the SeedPilot ISOBUS control system
5. Tramlines
Tramlines are on when activated
6.4. Feed units
The feed units are equipped with a push roller. In seed drills with a gearbox, the basic set-up of
feed quantities is done by altering the effective roller length with screw-type control wheels.
Fine-tuning is done from the machine’s transmission by adjusting the gearbox control lever.
In seed drills without a gearbox, the rough tuning of the feed rate is done by chain gears and
ne-tuning by altering the effective roller length with screw-type control wheels.
The feeders are powered by the machine's left running gear via a chain. In the feeder, there is a
shut-off plate between the feeder chamber and the hopper to completely shut off the feed of
the feeder chamber. Shutting part of the feeder with a shut-off plate allows seeding with
incomplete working width or, for example, increasing row spacing by seeding with only every
second coulter.
Operation and maintenance manual
1.00 FX300 and FX400 SeedPilot
95 (208)