Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 12 / 208

The manufacturer is not liable for damages caused by the use of components provided by other
manufacturers. The manufacturer is not liable for damage caused to other machines or
equipment that result from the use of this machine. The manufacturer reserves the right to
develop or modify the construction of the machine. The owner of the machine is responsible for
ensuring that all operators of the machine acquaint themselves with the machine's operating
and safety instructions.
1.5. Tightening torques
The table below shows the tightening torques of steel screws and nuts. If the tightening torque
to be used should be something other than what is listed in the table, the tightening torque will
be provided with the task instructions.
Table. 1.5. - 5. Tightening torques of steel screws and nuts
Steel screws and nuts: 8.8 Zn
Thread Torque (Nm)
M8 15
M12 90
M16 230
M18 250
M20 350
Operation and maintenance manual
FX300 and FX400 SeedPilot
1.00
12 (208)