Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 162 / 208

2. Open the bottom ap of the seed side feeder units in the back of the seed drill in the
same way.
The back bottom ap should be opened from the working platform.
Figure. 7.3.1. - 213. Cleaning the hoppers
3. Remove the sieves (1, 2) of the fertiliser hopper (3).
4. Clean the fertiliser hopper with pressurised air.
5. Wash the fertiliser and seed hopper (3, 4) with a detergent and warm water.
6. If needed, clean the hoppers with power wash.
CAUTION
Do not allow water to enter electrical instruments.
7. Dry the hoppers with pressurised air.
8. Close the bottom aps of the feeder units.
7.3.2. Cleaning of the small seed hopper
Wear protective goggles and protective gloves when cleaning the hoppers.
Clean the small seed hopper when the variety to be seeded changes and at the end of
the seeding season.
Operation and maintenance manual
FX300 and FX400 SeedPilot
1.00
162 (208)