Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 82 / 208

Figure. 5.3.4. - 88. Cylinder adjustment slats
1. Turn slats (2) over the cylinder (1) shaft.
2. Carefully run the cylinder against the slats and check visually that the machine is straight.
If needed, extend the cylinder and add or remove slats, if needed, until the
machine is straight.
5.3.5. Using the machine liſting circuit ball valve
Figure. 5.3.5. - 89. Lifting circuit ball valves
DANGER
Close the lifting circuit ball valve (2) before starting out and performing maintenance
The ball valve of the lifting circuit is closed when the handle (1) is
perpendicular to the hydraulic hose (A).
Open the machine’s lifting circuit ball valve (4) after moving the machine into its
working position.
The ball valve of the lifting circuit is open when the handle (3) is parallel with
the hydraulic hose (B).
Operation and maintenance manual
FX300 and FX400 SeedPilot
1.00
82 (208)