Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 35 / 208

4.2.1.10. Pressure sensors of the lifting and lowering circuit
Figure. 4.2.1.10. - 24. Pressure sensors of the lifting and lowering circuit
The 2 lifting and lowering circuit pressure sensors (1) are located at the front of the machine. The
pressure sensors are used to shut off the lift inhibit function once it has been run.
Lifting and lowering circuit pressure sensors are only in the SeedPilot ISOBUS control system.
4.2.1.11. Push button
Figure. 4.2.1.11. - 25. Push button
A blue push button (1) is located under the transmission cover. The button light is blinking when
the linear actuator seeks the correct position during the fertiliser calibration test when a
machine is equipped with adjusting of fertiliser target rate. The button resets the calibration test
rotations in adjusting of fertiliser target rate. See more detailed instructions in sections 6.8.3.
Calibration test with adjusting of fertiliser target rate - basic model and 6.8.4. Calibration test
with adjusting of fertiliser target rate - machine with gearbox. Push button only in the SeedPilot
ISOBUS control system.
Operation and maintenance manual
1.00 FX300 and FX400 SeedPilot
35 (208)