Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 17 / 208

DANGER
Before moving the tractor, check that the slow-vehicle triangle is visible and tractor
lights are lit and visible. Keep the triangle and lights clean, because they have a
considerable impact on the vehicle's traffic safety.
DANGER
The maximum allowed transportation speed of the seed drill is 40 km/h on a road that
is in good condition and even. The maximum allowed transportation speed of the seed
drill is 25 km/h on damaged roads
DANGER
When replacing hydraulic system components and conductors, only use spare parts
with sufficient pressure resistance.
DANGER
Never use oil or lubrication grease to clean skin. These substances may contain small
metal particles, which cause irritation of the skin or cuts. Follow the handling
instructions and safety regulations of the lubricant manufacturers. Synthetic oils are
often corrosive and cause strong irritation of the skin. Contact a doctor, if oil or grease
causes injuries.
DANGER
Never spray water directly on electric equipment.
CAUTION
Before servicing, ensure that the machine lifting ball valve is closed and the cylinders
are equipped with stoppers.
CAUTION
Use original spare parts of the machine whenever servicing and repairing the seed drill.
Using generic parts invalidates the warranty.
CAUTION
Collect oil waste and dispose of it appropriately in accordance with national
regulations.
CAUTION
If oil is spilled on the ground, absorb it with absorption material, such as turf, to prevent
the oil spill from spreading. Handle the absorption material in accordance with
regulations.
CAUTION
Clean the machine whenever you change fertiliser or seed types.
CAUTION
If the machine will be unused overnight or over a long rain season, empty its fertiliser
hopper in advance and clean the roller grooves of the feeder by adjusting feed quantity
from one extreme position to the other. Otherwise, the fertiliser may dissolve and clog
the feeders.
CAUTION
Before using a detergent, make sure it is appropriate for washing a seed drill. Follow the
safety and operating instructions of the detergent manufacturer.
Operation and maintenance manual
1.00 FX300 and FX400 SeedPilot
17 (208)