Figure. 5.1.8. - 66. Mounting the rear harrow
Number
Component
Quantity
1.
Washer M20
4 pcs
2.
Hex screw M20x60
2 pcs
3.
Rear harrow arm
2 pcs
4.
Tube
1 pc
5.
Locking nut M20
2 pcs
6.
Clamp
2 pcs
4. Use a lifting sling to raise the tube (4) of the rear harrow and position the tube so that the
rear harrow arms (3) are between the clamps (6).
5. Attach the rear harrow tube to the rear harrow arms by fastening the clamp with washers
(1), a hex screw (2) and a locking nut (5).
Tighten the bolts of the rear harrow so that there is no clearance.
6. Repeat step 5 for the other clamp.
5.1.9. Mounting rear markers to the rear harrow
Rear markers are an accessory.
DANGER
Mounting rear markers requires two people.
DANGER
Use a hoisting accessory when mounting rear markers.
Operation and maintenance manual
1.00
FX300 and FX400 SeedPilot
65 (208)
Summary of Contents for FX300 SeedPilot
