Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 135 / 208

7. Maintenance
DANGER
Depressurise the hydraulic system, disconnect the hoses and tractor's electrical
connections and let the machine cool off before servicing.
DANGER
There is a crushing and cutting hazard in the machine’s transmission when performing
servicing and maintenance. Switch off power in the tractor, remove the key from the
ignition and engage the parking brake before servicing.
Figure. 7. - 170. Cylinder stoppers
DANGER
There is a crushing hazard when performing servicing and maintenance. Place 4
stoppers (4) on the lifting cylinder rods. The FX300 has 1 lifting cylinder (2) onto which
the stoppers are placed. The FX400 has 3 lifting cylinders (1 -3). The stoppers are placed
on the outermost cylinders (1, 3). Place a stand or other suitable support under the
machine. Never go under the machine that is not propped up.
DANGER
Close the machine lifting circuit ball valve according to the instructions in section 5.3.5.
Using the machine lifting circuit ball valve.
DANGER
There is a crushing hazard underneath the machine and a cutting hazard in the
machine’s transmission when performing servicing and maintenance. Before servicing,
make sure that power is switched off in the tractor, the key is removed from the ignition
and the parking brake is engaged.
Operation and maintenance manual
1.00 FX300 and FX400 SeedPilot
135 (208)