Figure. 5.1.1. - 54. Connecting the hydraulic hoses
1.
Green, one mark
Drawbar cylinder, cylinder extend
2.
Green, two marks
Drawbar cylinder, cylinder retract
3.
Blue, one mark
Coulter pressure, decreasing the coulter pressure
4.
Blue, two marks
Coulter pressure, increasing the coulter pressure
5.
Red, one mark
Vertical movement of the seed drill, cylinder extend
6.
Red, two marks
Vertical movement of the seed drill, cylinder retract
10. Connect the hydraulic hoses 3-6.
Connect the hydraulic hoses of the drawbar cylinder only when the drawbar
cylinder is installed.
11. Push the hoses back towards the drawbar to eliminate slack and tighten the tube mounts
and cable ties.
12. Attach the electrical wires contained in a protective tube to the hydraulic hoses with
cable ties and guide the wires on the right side of the seed drill (viewed from the front).
13. Install the drawbar in accordance with section 5.1.2. Mounting the drawbar cylinder.
Operation and maintenance manual
FX300 and FX400 SeedPilot
1.00
56 (208)
Summary of Contents for FX300 SeedPilot
