Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 50 / 208

8. Drawbar cylinder adjustment
Figure. 4.2.4.3. - 48. Manual mode
1. Area screen
Data from the speed sensors.
2. Feeder shaft status
When the blue circle is spinning, the feeder shaft is rotating.
3. Hopper level sensor status
The circle is green when everything is functioning properly.
The circle is red when the fertiliser level in the hopper is too low.
4. Feed rate - fertiliser
Displays the fertiliser feed rate.
5. Seed screen
The screen displays the seed feed rate and data from the feeder shaft and
hopper level sensors.
6. Small seed screen
The screen displays the small seed feed rate and data from the feeder shaft and
hopper level sensors.
7. Height adjustment
Operation and maintenance manual
FX300 and FX400 SeedPilot
1.00
50 (208)