Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 106 / 208

Figure. 6.6.8. - 125. Bottom ap positions
When seeding small seeds, the bottom ap should be in position 0.
When seeding grain and fertiliser, the bottom ap should be in position 1.
When seeding large seeds, such as peas or bean, the bottom ap should be in
position 3.
When seeding organic fertilisers, the bottom ap should be in position 3.
2. Change the position of the control lever in the rear of the seed drill accordingly.
The rear control lever is adjusted from the working platform.
6.6.9. Adjusting the shut-off plate position
Figure. 6.6.9. - 126. Adjusting the shut-off plate position
1. Adjust the position of the shut-off plates (1) of the feeders in the seed and fertiliser side in
accordance with the material to be seeded.
When seeding turnip rape and oilseed, the shut-off plate must be closed three
notches.
When seeding grass, the shut-off plate must be closed two notches.
When seeding grain, fertiliser and beans, the shut-off plate must be completely
open.
All shut-off plates should be in the same position.
Operation and maintenance manual
FX300 and FX400 SeedPilot
1.00
106 (208)