Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 167 / 208

Figure. 7.4.1. - 220. Removal of the rear marker cylinders.
2. Remove the 2 rear marker cylinders (4) by removing the cotters (1, 7), pins (2, 6) and
washers (3, 5) and then place the cylinders on the working platform.
Figure. 7.4.1. - 221. Dismounting the rear harrow
3. If the machine is equipped with a rear harrow, dismount the rear harrow by removing the
bolts (2), washers (3, 4) and nuts (5) of the rear harrow shaft and detaching the rear
harrow chains (1) from the working platform.
Operation and maintenance manual
1.00 FX300 and FX400 SeedPilot
167 (208)