Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 165 / 208

Figure. 7.3.5. - 217. Feeder roller
1. If there is seed or fertiliser residue left in the feeder roller (1), adjust the roller width in
accordance with section 6.6.5. Adjusting the width of the feeder roller.
2. If there is still seed or fertiliser residue left in the feeder roller after the adjustment, clean
the roller grooves with a wooden stick.
7.3.6. Cleaning of the small seed hopper feeder units
Wear protective goggles and protective gloves when cleaning the feeder .
Clean the feeder units at the end of the seeding season.
Figure. 7.3.6. - 218. Feeder roller
1. If there is seed or fertiliser residue left in the feeder roller, adjust the roller lengthwise in
accordance with section 6.6.10. Adjusting the width of the small seed feeder roller.
2. If there is still seed residue left in the feeder roller after the adjustment, clean the roller
grooves with a wooden stick.
Operation and maintenance manual
1.00 FX300 and FX400 SeedPilot
165 (208)