Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 80 / 208

The boom has three adjustment position at 200 mm intervals. The maximum
length adjustment is 400 mm.
3. Insert the mounting pin in the boom and lock it in place with the cotter.
5.3.2. Using the ground support
Figure. 5.3.2. - 84. Ground support
1. Remove the cotter (4) of the ground support (3) mounting pin (5) and pull the mounting
pin out of the ground support.
2. Move the ground support up or down by the lever (1).
3. Lock the ground support in the mounting hole. Attach the mounting pin and the cotter.
The upper mounting hole (2) locks the ground support in the down position. The
lower mounting hole locks the ground support in the up position.
5.3.3. Adjusting the lengthwise level of the machine with a turnbuckle
Perform the adjustment when the machine is on a level surface.
Figure. 5.3.3. - 85. Lengthwise level
Operation and maintenance manual
FX300 and FX400 SeedPilot
1.00
80 (208)