Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 145 / 208

Figure. 7.1.5.4. - 184. Checking the tightness of the chains in the small seed hopper transmission
2. Check the de ection of the chains (1-3) by pressing the chain down and lifting it up with
your nger.
The maximum allowed de ection (A) is 10 mm. If needed, tighten the chains in
accordance with section 7.5.4. Tightening the transmission chains of the small
seed hopper.
3. Put the transmission cover back in place.
7.1.6. Checking the tightness of the wheel drive chain
Figure. 7.1.6. - 185. Cover of the wheel drive housing
1. Open and remove the fastening bolts (1,3) of the wheel drive housing and the housing
cover (2).
Operation and maintenance manual
1.00 FX300 and FX400 SeedPilot
145 (208)