Multiva FX300 SeedPilot, Operation And Maintenance Manual

Page: 174 / 208

3. Loosen the seed side chain (3) by loosening the nut of the chain gear (2).
4. Tighten the seed side chain by pushing the chain gear (2) downward.
5. Tighten the chain gear nut (2).
6. Tighten the fertiliser side chain by pushing the chain gear (4) downward.
7. Tighten the chain gear nut (4).
8. Check the chains for de ection.
The de ection should be less than 10 mm.
9. Put the transmission cover back in place.
7.5.3. Tightening the chains in a machine with a dual gearbox
1. Raise the transmission cover.
Figure. 7.5.3. - 234. Tightening the chains in a machine with a dual gearbox
2. Loosen the gearbox chain (3) by loosening the nut of the chain gears (1, 5).
3. Loosen the fertiliser side chain (2) by loosening the nut of the chain gear (6).
4. Tighten the seed side chain (4) by pushing the chain gear (5) downward.
5. Tighten the chain gear nut (5).
6. Tighten the transmission chain by pushing the chain gear (1) downward.
7. Tighten the chain gear nut (1).
8. Tighten the fertiliser side chain by pushing the chain gear (6) downward.
9. Tighten the chain gear nut (6).
10. Check the chains for de ection.
The de ection should be less than 10 mm.
11. Put the transmission cover back in place.
7.5.4. Tightening the transmission chains of the small seed hopper
1. Raise the transmission cover.
Operation and maintenance manual
FX300 and FX400 SeedPilot
1.00
174 (208)