Motoman SK300X, Manual

Page: 32 / 553

1.5 Motoman Safety
1-7
• Operation of the crane, sling, or forklift should only be performed by
authorized personnel.
Failure to observe this precaution may result in injury or equipment damage.
MOTOMAN should be lifted with a crane using wire rope threaded through the shipping
bolts and jigs and the body should be lifted in an upright posture as described in the
manipulator instruction manual.
Failure to observe these precautions may cause the manipulator to turn downward,
potentially causing injury or damage to equipment.
• When lifting the XRC, please check the following:
-As a rule, handling of XRC must be performed using a crane with wire
rope threaded through attached eyebolts.
-Be sure to use wire that is strong enough to handle the weight of the
XRC.
• Be sure the eyebolts are securely fastened.
Failure to observe this caution may result in injury or damage to equipment.
• If storing the manipulator temporarily before installation, be sure to
place it on a stable and flat surface and take precautions to prevent
unauthorized personnel from touching it.
Failure to observe this precaution may result in injury of damage to equipment.
THE WEIGHT OF XRC (approx.)
XRC equivalent
model
Approx.
weight
(kg)
SV3X,UP6,SK16X 70
SK45X,SK16MX 90
UP130,UP165,
UP200,UP130R,
SP100X
100