216
5 NETWORK PARAMETER DETAILS
5.1 Network basic parameters
[Pr. NPA02_IP address]
Set the IP address.
Set each octet to a value between 0 to 255.
In the eight digits of hexadecimal, the first to fourth octets are expressed with each pair of digits.
Set the IP address assigned by the network administrator.
Refer to the following for the relation to the rotary switch.
Page 215 [Pr. NPA01_IP address setting]
When SLMP command (IPAddressSet) is received at the time of IP address delivery from the controller, this network
parameter is overwritten with the received IP address.
To enable this network parameter, cycle the power or reset the software after setting.
This network parameter cannot be rewritten via the parameter automatic setting.
[Pr. NPA04_Subnet mask]
Set the subnet mask.
Set each octet to a value between 0 to 255.
In the eight digits of hexadecimal, the first to fourth octets are expressed with each pair of digits.
Set the subnet mask assigned by the network administrator.
When SLMP command (IPAddressSet) is received at the time of IP address delivery from the controller, this network
parameter is overwritten with the received subnet mask.
To enable this network parameter, cycle the power or reset the software after setting.
This network parameter cannot be rewritten via the parameter automatic setting.
Initial value
Setting range
Size
Ver.
192.168.3.1 (C0A80301h)
Refer to the text
4 bytes
A0
Initial value
Setting range
Size
Ver.
255.255.255.0 (FFFFFF00h)
Refer to the text
4 bytes
A0
4th octet
Two
digits
Two
digits
Two
digits
Two
digits
3rd octet
2nd octet
1st octet
4th octet
Two
digits
Two
digits
Two
digits
Two
digits
3rd octet
2nd octet
1st octet
