Mazda CX-52017 Owner'S Manual Download Page 76

Page: 76 / 664

2–62

Essential Safety Equipment

SRS Air Bags

If the front passenger occupant classi

cation sensor is normal, the indicator light turns

on when the ignition is switched ON. The light turns off after a few seconds. Then, the

indicator light turns on or is off under the following conditions:

Front passenger air bag deactivation indicator light on/off condition chart

Condition detected by the

front passenger occupant

classi

cation system

Front passenger air

bag deactivation

indicator light

Front passenger front

and side air bags

Front passenger seat

belt pretensioner

system

Empty (Not occupied)

Deactivated

A child less than 1 year old is

seated in a child-restraint system

Deactivated

Child

On or off

Deactivated or ready

Adult

Off

Ready

*1 The occupant classi

cation sensor may not detect a child seated on the seat, in a child-restraint system, or a

junior seat depending on the child's physical size and seated posture.

*2 If a smaller adult sits on the front passenger seat, the sensors might detect the person as being a child depending

on the person's physique.

The curtain air bag is ready for in

ating regardless of what the front passenger air bag

deactivation indicator light on/off condition chart indicates.

If the front passenger air bag deactivation indicator light does not turn on when the ignition

is switched ON and does not turn on as indicated in the front passenger air bag deactivation

indicator light on/off condition chart, do not allow an occupant to sit in the front passenger

seat and consult an Authorized Mazda Dealer as soon as possible. The system may not work

properly in an accident.

CX-5_8FN1-EA-16L_Edition1.indb 62

2016/12/12 10:05:27

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands