Mazda CX-52017 Owner'S Manual Download Page 245

Page: 245 / 664

4–101

When Driving

i-ACTIVSENSE







In the following case, the

ashing of the Blind Spot Monitoring (BSM) warning indicator

light, and the activation of the warning sound and the warning screen indicator display

may not occur or they may be delayed.







A vehicle makes a lane change from a driving lane two lanes over to an adjacent lane.







Driving on steep slopes.







Crossing the summit of a hill or mountain pass.







When there is a difference in the height between your driving lane and the adjacent

lane.







Directly after the Blind Spot Monitoring (BSM) system becomes operable by changing

the setting.







If the road width is extremely narrow, vehicles two lanes over may be detected.

The detection area of the radar sensors (rear) is set according to the road width of

expressways.







The Blind Spot Monitoring (BSM) warning indicator light may turn on and the vehicle

detection screen may be displayed in the display in reaction to stationary objects

(guardrails, tunnels, sidewalls, and parked vehicles) on the road or the roadside.

Objects such as guardrails and concrete walls
running alongside the vehicle.

Places where the width between guardrails or
walls on each side of the vehicle narrows.

The walls at the entrance and exits of tunnels
and turnouts.







A Blind Spot Monitoring (BSM) warning indicator light may

ash or the warning beep

may be activated several times when making a turn at a city intersection.







Turn off the Blind Spot Monitoring (BSM) while pulling a trailer or while an accessory

such as a bicycle carrier is installed to the rear of the vehicle. Otherwise, the radar’s

radio waves will be blocked causing the system to not operate normally.







In the following cases, it may be dif

cult to view the illumination/

ashing of the Blind

Spot Monitoring (BSM) warning indicator lights equipped on the door mirrors.







Snow or ice is adhering to the door mirrors.







The front door glass is fogged or covered in snow, frost or dirt.

CX-5_8FN1-EA-16L_Edition1.indb 101

2016/12/12 10:06:05

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands