Mazda CX-52017 Owner'S Manual Download Page 605

Page: 605 / 664

8–17

Customer Information and Reporting Safety Defects

Warranty

Outside the United States/Canada

Government regulations in the United States/Canada require that automobiles meet speci

emission regulations and safety standards. Therefore, vehicles built for use in the United

States/Canada may differ from those sold in other countries.

The differences may make it dif

cult or even impossible for your vehicle to receive

satisfactory servicing in other countries. We strongly recommend that you NOT take your

Mazda outside the United States/Canada.

United States

However, in the event that you are moving to Canada permanently, Mazda vehicles built

for use in the United States could be eligible for exportation to Canada with speci

c vehicle

modi

cations to comply with the Canadian Motor Vehicle Safety Standards (CMVSS).

Canada

However, in the event that you are moving to the United States permanently, Mazda vehicles

built for use in Canada could be eligible for exportation to the United States with speci

vehicle modi

cations to comply with the United States Federal Motor Vehicle Safety

Standards (FMVSS).

NOTE

The above is applicable for a permanent import/export situation and not related to travelers

on vacation.

You may have the following problems if you do take your vehicle outside of the United

States/Canada:







Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel will

affect vehicle performance and damage the emission controls and engine.







Proper repair facilities, tools, testing equipment, and replacement parts may not be

available.

Please refer to your Manufacturer's Warranty Booklet for more information.

CX-5_8FN1-EA-16L_Edition1.indb 17

2016/12/12 10:07:32

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands