Mazda CX-52017, Owner'S Manual

Page: 275 / 664

4–131
When Driving
i-ACTIVSENSE
Under the following conditions, the
Mazda Radar Cruise Control with Stop
& Go function (MRCC with Stop & Go
function) cancel indication is displayed in
the multi-information display and a single
beep sound is heard.
     
The DSC has operated.
     
The Smart Brake Support (SBS) has
operated.
     
The Smart City Brake Support (SCBS)
has operated.
     
When traveling on a downslope for a
long period of time.
     
There is a problem with the system.
     
The engine has stalled.
     
The electric parking brake (EPB) is
automatically applied during stop hold
control.
     
The radar sensor (front) cannot detect
target objects (during rain, fog, snow or
other inclement weather conditions, or
when the radiator grille is dirty).
Resuming control
If the Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop &
Go function) system is canceled, you can
resume control at the previously set speed
by pressing the RES switch and after all of
the operation conditions have been met.
NOTE
If the set speed is not indicated in the
display, the control does not resume even
if the RES switch is pressed.
Turning off the system
Press the OFF/CAN switch two times
while the Mazda Radar Cruise Control
with Stop & Go function (MRCC with
Stop & Go function) system is operating to
switch off the system.
CX-5_8FN1-EA-16L_Edition1.indb 131 2016/12/12 10:06:12