Mazda CX-52017 Owner'S Manual Download Page 576

Page: 576 / 664

7–34

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

*Some models.

Signal

Warning

Action to be taken

Low Washer Fluid Level

Warning Indication/

Warning Light

This warning light indicates that little

washer

uid remains.

Add washer

uid (page 6-27 ).

Door-Ajar/Liftgate-Ajar

Warning Indication/

Warning Light

The light turns on if any door/liftgate is

not closed securely.

Close the door/liftgate securely.

KEY Warning Indication/Warning Light

Take the appropriate action and verify that the warning light turns off.

Signal

Cause

Action to be taken

(White)

KEY Warning

Indication

The key battery is dead.

Replace the key battery (page 6-36 ).

(Red)

(Flashing)

KEY Warning Light

The key battery is dead.

Replace the key battery (page 6-36 ).

The key is not within the operation range.

Bring the key into the operation range

(page 3-8 ).

The key is placed in areas inside the

cabin where it is dif

cult for the key to be

detected.

A key from another manufacturer similar to

the key is in the operation range.

Take the key from another manufacturer

similar to the key out of the operation

range.

Without the ignition switched off, the key is

taken out of the cabin, and then all the doors

are closed.

Bring the key back into the cabin.

CX-5_8FN1-EA-16L_Edition1.indb 34

2016/12/12 10:07:27

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands