Mazda CX-52017, Owner'S Manual

Page: 23 / 664

2–9
Essential Safety Equipment
Seats
Programming
1. Make sure the parking brake is on.
2.
(Automatic transaxle)
Make sure the selector lever is in the P
position.
3. Start the engine.
4. Adjust the seat and the active driving
display to the desired driving position.
5. Press the SET button on the seat until a
beep sound is heard one time.
6. Perform one of the following settings
within 5 seconds of completing step 5
above:
   

 
Programming using a button on
the side of the seat
 
Press the button you want to program,
either button 1 or 2, until a beep
sound is heard one time.
   

 
Programming using the key
 
Press the key button until a beep
sound is heard one time.
NOTE
If a beep sound is heard three times, the
operation is canceled.
To move the driving position to a
programmed position
(Using a button on the side of the seat)
1. Make sure the parking brake is on.
2. (Automatic transaxle)
Make sure the selector lever is in the P
position.
3. Start the engine.
4. Press the programming button for the
driving position you want to call up
(button 1 or 2).
5. A beep sound is heard when the driving
position adjustment is completed.
NOTE
     
If the driving position movement is not
changed, only the beep sounds.
     
A seat position can be called up even
with the engine not running.
     
The driving position adjustment is
canceled in the following cases:
     
Any of the seat adjustment switches
is operated.
     
The SET button is pressed.
     
Programming button 1 or 2 is
pressed.
     
The key button or button is
operated.
     
The vehicle starts moving.
     
The active driving display is
adjusted.
(Using a programmed key)
1. Unlock the doors by pressing a request
switch or the key button.
2. After unlocking the doors, the seat
position adjustment begins within
40 seconds of opening the driver's door,
and a beep sounds when the operation
is
fi
nished.
3. Make sure the parking brake is on.
4. (Automatic transaxle)
Make sure the selector lever is in the P
position.
5. Start the engine.
6. The active driving display adjustment
begins.
CX-5_8FN1-EA-16L_Edition1.indb 9 2016/12/12 10:05:16