Mazda CX-52017 Owner'S Manual Download Page 34 | Manualshive

Page: 34 / 664

background image

2–20

Essential Safety Equipment

Seat Belt Systems

Seat Belt Precautions

Seat belts help to decrease the possibility of severe injury during accidents and sudden

stops. Mazda recommends that the driver and all passengers always wear seat belts.

(Except Mexico)

All of the seat belt retractors are designed to keep the lap/shoulder belts out of the way when

not in use.

The driver's seat belt has no provisions for child-restraint systems and has only an

emergency locking mode. The driver may wear it comfortably, and it will lock during a

collision.

However, the front passenger's seat and all rear lap/shoulder belt retractors operate in

two modes: emergency locking mode, and for child-restraint systems, automatic locking

mode. While we recommend you put all children in the rear seats, if you must use the front

passenger seat for a child, slide the front passenger seat as far back as possible and make

sure any child-restraint system is secured properly.

(Mexico)

All the seats have lap/shoulder belts. These belts have retractors with inertia locks that keep

them out of the way when not in use. The locks allow the belts to remain comfortable on

users, but they will lock in position during a collision.

WARNING

Always wear your seat belt and make sure all occupants are properly restrained:

Not wearing a seat belt is extremely dangerous. During a collision, occupants not
wearing seat belts could hit someone or things inside the vehicle or even be thrown out of
the vehicle. They could be seriously injured or even killed. In the same collision, occupants
wearing seat belts would be much safer.

Do not wear twisted seat belts:

Twisted seat belts are dangerous. In a collision, the full width of the belt is not available to
absorb the impact. This puts more force on the bones beneath the belt, which could cause
serious injury or death. So, if your seat belt is twisted, you must straighten the seat belt to
remove any twists and to allow the full width of the belt to be used.

Never use one seat belt on more than one person at a time:

Using one seat belt for more than one person at a time is dangerous. A seat belt used
in this way cannot spread the impact forces properly and the two passengers could
be crushed together and seriously injured or even killed. Never use one belt for more
than one person at a time and always operate the vehicle with each occupant properly
restrained.

CX-5_8FN1-EA-16L_Edition1.indb 20

2016/12/12 10:05:18

«
...
32
33
34
35
36
...
»

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-52017

Brand: Samsung Pages: 133

Brand: EAL Pages: 4

Brand: TATA Motors Pages: 161

Brand: TAUBENREUTHER Pages: 11

Brand: Yakima Pages: 15

Brand: Vauxhall Pages: 199

Brand: Metra Electronics Pages: 2

Brand: Kia Pages: 10

Intercooler Kit Type 31

Brand: GReddy Pages: 9

Brand: Webasto Pages: 34

Brand: Vauxhall Pages: 259

SANICON TURBO 300

Brand: Thetford Pages: 25

Security Cage Kit

Brand: Toro Pages: 8

Brand: Aries Pages: 3

Brand: Lock'er Down Pages: 2

Brand: Goobay Pages: 2

Brand: JBA Pages: 5

Brand: Buick Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands