Mazda CX-52017 Owner'S Manual Download Page 461

Page: 461 / 664

5–133

Interior Features

Appendix

FM characteristics

An FM broadcast range is usually about

40—50 km (25—30 miles) from the

source. Because of extra coding needed to

break the sound into two channels, stereo

FM has even less range than monaural

(non-stereo) FM.

FM Station

40—50km
(25—30 miles)

Signals from an FM transmitter are similar

to beams of light because they do not

bend around corners, but they do re

ect.

Unlike AM signals, FM signals cannot

travel beyond the horizon. Therefore, FM

stations cannot be received at the great

distances possible with AM reception.

AM wave

FM wave

100—200 km (60—120 miles)

Ionosphere

Atmospheric conditions can also affect

FM reception. High humidity will cause

poor reception. However, cloudy days may

provide better reception than clear days.

Multipath noise

Since FM signals can be re

ected by

obstructions, it is possible to receive both

the direct signal and the re

ected signal

at the same time. This causes a slight

delay in reception and may be heard as a

broken sound or a distortion. This problem

may also be encountered when in close

proximity to the transmitter.

Reflected wave

Direct

Flutter/Skip noise

Signals from an FM transmitter move in

straight lines and become weak in valleys

between tall buildings, mountains, and

other obstacles. When a vehicle passes

through such an area, the reception

conditions may change suddenly, resulting

in annoying noise.

CX-5_8FN1-EA-16L_Edition1.indb 133

2016/12/12 10:06:59

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands