Mazda CX-52017 Owner'S Manual Download Page 54

Page: 54 / 664

2–40

Essential Safety Equipment

Child Restraint

5. To get the retractor into the automatic

locking mode, pull the shoulder belt

portion of the seat belt until the entire

length of the belt is out of the retractor.

6. Push the child-restraint system

rmly

into the vehicle seat. Be sure the

belt retracts as snugly as possible. A

clicking noise from the retractor will

be heard during retraction if the system

is in automatic locking mode. If the

belt does not lock the seat down tight,

repeat the previous step and also this

one.

NOTE







Inspect this function before each use of

the child-restraint system. You should

not be able to pull the shoulder belt

out of the retractor while the system is

in the automatic locking mode. When

you remove the child-restraint system,

be sure the belt fully retracts to return

the system to emergency locking mode

before occupants use the seat belts.







Follow the child-restraint system

manufacturer's instructions carefully.



Depending on the type of child-restraint

system, it may not employ seat belts

which are in automatic locking mode.

7. Seat your child safely in the child-

restraint system and secure the child

according to the instructions from the

child-restraint system manufacturer.

8. Switch the ignition ON and make sure

the front passenger air bag deactivation

indicator light illuminates after

installing a child-restraint system on

the front passenger seat.

If the front passenger air bag

deactivation indicator light does not

illuminate, remove the child-restraint

system, switch the ignition to OFF, and

then re-install the child-restraint system

(page 2-61 ).

CX-5_8FN1-EA-16L_Edition1.indb 40

2016/12/12 10:05:23

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands