Mazda CX-52017 Owner'S Manual Download Page 107

Page: 107 / 664

3–27

Before Driving

Doors and Locks

Operation from outside (To open)

Press the electric liftgate opener on the

liftgate and raise the liftgate. The hazard

warning lights

ash twice and the liftgate

opens automatically after the beep sound

is heard.

(With the advanced keyless function)

A locked liftgate can also be opened while

the key is being carried.

Electric liftgate

opener

Operation from outside (To close)

Press the power liftgate close switch while

the liftgate is fully opened. The hazard

warning lights

ash twice and the liftgate

closes automatically after the beep sound

is heard.

Power liftgate

close switch

NOTE

If the power liftgate switch/power liftgate

close switch is pressed or the electric

liftgate opener is operated while the

liftgate is opening/closing electrically, the

beep sound is heard and the liftgate stops.

Then, it reverses when any of the switches

are pressed again.

Changing the power liftgate fully open

position

The power liftgate fully-open position can

be changed according to the height of a

garage.

When changing the position

1. Stop the liftgate at the desired position.

2. Press the power liftgate close switch

for about three seconds.

A beep sound is activated two times to

indicate that the position change has

been completed.

NOTE

Set the desired fully-open position of the

liftgate at the position where it is open

more than halfway. The position where it

is less than halfway open cannot be set.

To reset

1. Open the liftgate.

2. Press the power liftgate close switch

for about seven seconds.

A beep sound is activated three times

to indicated that the reset has been

completed.

CX-5_8FN1-EA-16L_Edition1.indb 27

2016/12/12 10:05:33

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands