Mazda CX-52017 Owner'S Manual Download Page 267

Page: 267 / 664

4–123

When Driving

i-ACTIVSENSE

NOTE







The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go

function) system does not detect the following as physical objects.







Vehicles approaching in the opposite direction







Pedestrians







Stationary objects (stopped vehicles, obstructions)







If a vehicle ahead is traveling at an extremely low speed, the system may not detect it

correctly.







During headway control travel, do not set the system for detection of two-wheeled

vehicles such as motorcycles and bicycles.







Do not use the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop

& Go function) system under conditions in which close proximity warnings are frequently

activated.







During headway control travel, the system accelerates and decelerates your vehicle in

conjunction with the speed of the vehicle ahead. However, if it is necessary to accelerate

for a lane change or if the vehicle ahead brakes suddenly causing you to close in on the

vehicle rapidly, accelerate using the accelerator pedal or decelerate using the brake

pedal depending on the conditions.







While the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go

function) system is in use, it does not cancel even if the selector lever is operated and any

intended engine braking does not occur. If deceleration is required, lower the set speed or

depress the brake pedal.







The sound of the automatic brakes operating may be heard, however, it does not indicate

a problem.







The brake lights turn on while the Mazda Radar Cruise Control with Stop & Go function

(MRCC with Stop & Go function) automatic braking is operating, however.

CX-5_8FN1-EA-16L_Edition1.indb 123

2016/12/12 10:06:10

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands