Mazda CX-52017 Owner'S Manual Download Page 286

Page: 286 / 664

4–142

When Driving

i-ACTIVSENSE

NOTE







After the operation, the Lane-keep

Assist System (LAS) & Lane Departure

Warning System (LDWS) operation may

not operate for a period of 5 seconds

at the most until the lane lines are

detected.







Under the following conditions, the

Lane-keep Assist System (LAS) & Lane

Departure Warning System (LDWS)

cancels the warning/steering assist

automatically.







The driver takes his/her hands off the

steering wheel.



(The Lane-keep Assist System (LAS)

& Lane Departure Warning System

(LDWS) is designed to assist the

driver's steering operation and it

will resume operation automatically

when the driver holds the steering

wheel.)







The TCS OFF switch is pressed to

cancel the TCS.

Steering operation assist OFF (non-

operational)

The steering operation assist for the

Lane-keep Assist System (LAS) & Lane

Departure Warning System (LDWS) can

be changed to non-operational (OFF).

Refer to Setting Change (Personalization

Features) on page 9-11 .

When the steering operation assist has

been changed to non-operational (OFF),

the operation conditions and the display

of the Lane-keep Assist System (LAS) &

Lane Departure Warning System (LDWS)

differ. Operate the system as follows:

System operation

Make sure that the Lane-keep Assist

System (LAS) & Lane Departure Warning

System (LDWS) OFF indicator light in the

instrument cluster is turned off. When the

Lane-keep Assist System (LAS) & Lane

Departure Warning System (LDWS) OFF

indicator light turns on, press the switch

and make sure that the indicator light turns

off.

CX-5_8FN1-EA-16L_Edition1.indb 142

2016/12/12 10:06:15

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands