Mazda CX-52017 Owner'S Manual Download Page 276

Page: 276 / 664

4–132

When Driving

i-ACTIVSENSE

Stop Hold Control

While in headway control using the Mazda Radar Cruise Control with Stop & Go function

(MRCC with Stop & Go function) system, your vehicle will stop when a vehicle ahead

stops. When the vehicle is stopped and the stop hold control operates, the Mazda Radar

Cruise Control with Stop & Go function (MRCC with Stop & Go function) indicator light

turns on.

NOTE







If the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go

function) system is canceled during stop hold control, the vehicle is held in its stopped

position. The stop hold control can be canceled by performing one the following actions.







Press the accelerator pedal and resume driving the vehicle.







While forcefully depressing the brake, switch the Mazda Radar Cruise Control with

Stop & Go function (MRCC with Stop & Go function) system off.







The electric parking brake (EPB) is automatically applied and the vehicle is held in its

stopped position when 10 minutes have elapsed since the stop hold control operated. At

this time, the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop &

Go function) system is canceled.







The brake lights turn on during stop hold control.

To resume driving

After the vehicle ahead starts moving while your vehicle is stopped under stop hold control,

press the RES switch or depress the accelerator pedal to cancel the stop hold control and

resume driving.

NOTE







When you resume driving by pressing the RES switch, your vehicle does not start moving

until the distance between your vehicle and the vehicle ahead lengthens to the speci

distance or farther.







If the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go

function) is temporarily canceled during stop hold control, you cannot resume driving by

pressing the RES switch when there are no vehicles in front of your vehicle. Depress the

accelerator pedal and resume driving the vehicle.

CX-5_8FN1-EA-16L_Edition1.indb 132

2016/12/12 10:06:13

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands