Mazda CX-52017 Owner'S Manual Download Page 131 | Manualshive

Page: 131 / 664

background image

3–51

Before Driving

Driving Tips

Floor Mat

We recommend the use of Genuine

Mazda

fl

oor mats.

WARNING

Make sure the fl oor mats are hooked on
the retention pins to prevent them from
bunching up under the foot pedals:

Using a fl oor mat that is not secured is
dangerous as it will interfere with the
accelerator and brake pedal operation,
which could result in an accident.

Do not install two fl oor mats, one on top
of the other, on the driver's side:

  Installing two fl oor mats, one on top
of the other, on the driver's side is
dangerous as the retention pins can
only keep one fl oor mat from sliding
forward.
  Loose fl oor mat(s) will interfere with
the foot pedal and could result in an
accident.
  If using an all-weather mat for winter
use always remove the original fl oor
mat.

When setting a

fl

oor mat, position the

fl

oor

mat so that its grommets are inserted over

the pointed end of the retention posts.

Rocking the Vehicle

WARNING

Do not spin the wheels at more than
56 km/h (35 mph), and do not allow
anyone to stand behind a wheel when
pushing the vehicle:

When the vehicle is stuck, spinning the
wheels at high speed is dangerous.
The spinning tire could overheat and
explode. This could cause serious
injuries.

CAUTION

Too much rocking may cause engine
overheating, transaxle failure, and tire
damage.

If you must rock the vehicle to free it from

snow, sand or mud, depress the accelerator

slightly and slowly move the shift lever

from 1 (D) to R.

CX-5_8FN1-EA-16L_Edition1.indb 51

2016/12/12 10:05:37

«
...
129
130
131
132
133
...
»

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-52017

Brand: B-Speech Pages: 18

Brand: Wagan Pages: 12

Brand: Uebler Pages: 18

1306 RAPID SYSTEM

Brand: Thule Pages: 8

Brand: Honda Pages: 32

Brand: Dometic Pages: 158

Escalade ESV 2014

Brand: Cadillac Pages: 508

Brand: Hama Pages: 2

Brand: Honda Pages: 20

2009 Rio Series

Brand: Kia Pages: 219

Brand: Whispbar Pages: 17

Brand: Xpresskit Pages: 18

Brand: Thule Pages: 3

Brand: Lantronix Pages: 51

Brand: BraunAbility Pages: 46

Brand: KLAUS Multiparking Pages: 72

Brand: Summit Racing Pages: 11

2000 Accord Sedan

Brand: Honda Pages: 320

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands