Mazda CX-52017 Owner'S Manual Download Page 240

Page: 240 / 664

4–96

When Driving

i-ACTIVSENSE

*Some models.

High Beam Control System (HBC)

The High Beam Control System (HBC) determines the conditions in front of the vehicle

using the Forward Sensing Camera (FSC) while driving in darkness to automatically switch

the headlights between high and low beams.

Refer to Warning/Indicator Lights on page 4-32 .

While driving the vehicle at a speed of about 30 km/h (19 mph) or more, the headlights are

switched to high beams when there are no vehicles ahead or approaching in the opposite

direction.

The system switches the headlights to low beams when one of the following occurs:







The system detects a vehicle or the headlights/lights of a vehicle approaching in the

opposite direction.







The vehicle is driven on roads lined with streetlamps or on roads in well-lit cities and

towns.







The vehicle is driven at less than about 20 km/h (12 mph).

Forward Sensing

Camera (FSC)

The recognition distance of the
Forward Sensing Camera (FSC)
varies according to the
surrounding conditions.

The warning light turns on when the system has a malfunction.

Refer to Warning Indication/Warning Lights on page 4-33 .

CAUTION







Do not adjust the vehicle height, modify the headlight units, or remove the camera,

otherwise the system will not operate normally.







Do not rely excessively on the High Beam Control System (HBC) and drive the vehicle while

paying suffi

cient attention to safety. Switch the headlights between the high beams and

low beams manually if necessary.

CX-5_8FN1-EA-16L_Edition1.indb 96

2016/12/12 10:06:04

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands