Mazda CX-52017 Owner'S Manual Download Page 618

Page: 618 / 664

8–30

Customer Information and Reporting Safety Defects

Tire Information (U.S.A.)

Location of the Tire Label (Placard)

You will

nd the tire label containing tire in

ation pressure by tire size and other important

information on the driver's side B-pillar or on the edge of the driver's door frame.

SAMPLE

Recommended Tire In

ation Pressure

On the tire label you will

nd the recommended tire in

ation pressure in both kPa and

psi for the tires installed as original equipment on the vehicle. It is very important that the

ation pressure of the tires on your vehicle is maintained at the recommended pressure.

You should check the tire pressure regularly to insure that the proper in

ation pressure is

maintained.

Refer to Tires on page 9-9 .

NOTE

Tire pressures listed on the vehicle placard or tire information label indicate the

recommended cold tire in

ation pressure, measured when the tires are cold, after the vehicle

has been parked for at least 3 hours. As you drive, the temperature in the tire warms up,

increasing the tire pressure.

CX-5_8FN1-EA-16L_Edition1.indb 30

2016/12/12 10:07:33

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands