Mazda CX-52017 Owner'S Manual Download Page 522

Page: 522 / 664

6–46

Maintenance and Care

Owner Maintenance

4. Pull the center of each plastic retainer

using a

athead screwdriver and

remove the retainers, and then partially

peel back the mudguard.

Removal

Installation

5. Turn the socket and bulb assembly

counterclockwise and remove it.

6. Disconnect the bulb from the socket.

7. Install the new bulb in the reverse order

of the removal procedure.

Rear turn signal lights, Brake lights/

Taillights/Rear side-marker lights (Type

1. Make sure the ignition is switched off,

and the turn signal switch is off.

2. Wrap a small

athead screwdriver with

a soft cloth to prevent damage to the

cover, and then remove the cover with

the

athead screwdriver.

3. Turn the bolts counterclockwise and

remove them.

CX-5_8FN1-EA-16L_Edition1.indb 46

2016/12/12 10:07:14

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands