Mazda CX-52017 Owner'S Manual Download Page 494

Page: 494 / 664

6–18

Maintenance and Care

Owner Maintenance

Owner Maintenance Precautions

The owner or a quali

ed service technician should make these vehicle inspections at the

indicated intervals to ensure safe and dependable operation.

Bring any problem to the attention of an Authorized Mazda Dealer or quali

ed service

technician as soon as possible.

When Refueling







Brake and clutch

uid level (page 6-27 )







Engine coolant level (page 6-25 )







Engine oil level (page 6-25 )







Washer

uid level (page 6-27 )

At Least Monthly







Tire in

ation pressures (page 6-39 )

At Least Twice a Year (For Example, Every Spring and Fall)

You can do the following scheduled maintenance items if you have some mechanical ability

and a few basic tools and if you closely follow the directions in this manual.







Engine coolant (page 6-25 )







Engine oil (page 6-23 )

Improper or incomplete service may result in problems. This section gives instructions only

for items that are easy to perform.

As explained in the Introduction (page 6-2 ), several procedures can be done only by a

quali

ed service technician with special tools.

Improper owner maintenance during the warranty period may affect warranty coverage.

Refer to Introduction (page 6-2 ) for owner's responsibility in protecting your investment.

For details, read the separate Mazda Warranty statement provided with the vehicle. If you

are unsure about any servicing or maintenance procedure, have it done by an Authorized

Mazda Dealer.

There are strict environmental laws regarding the disposal of waste oil and

uids. Please

dispose of your waste properly and with due regard to the environment.

We recommend that you entrust the oil and

uid changes of your vehicle to an Authorized

Mazda Dealer.

CX-5_8FN1-EA-16L_Edition1.indb 18

2016/12/12 10:07:06

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands